Canon iR2270 - Network print error #853

[th83]

I've seen in the pdf file you gave in a similar post that my RAM dimm was only 256MB but here is the confirmation :

photo 5 - Copie.JPG

Do I have to buy Canon branded dimm or any 256MB SD-RAM PC133 dimm will fill ?

Also, the bootrom is inserted in the correct slot (I took the old one and replace it with new one).

One more time, thank you for your science, you're a copier-master !

[teckat]

I've seen in the pdf file you gave in a similar post that my RAM dimm was only 256MB but here is the confirmation :

photo 5 - Copie.JPG

Do I have to buy Canon branded dimm or any 256MB SD-RAM PC133 dimm will fill ?

Also, the bootrom is inserted in the correct slot (I took the old one and replace it with new one).

One more time, thank you for your science, you're a copier-master !

================================================== ====================


What about where u purchased this printer/ they ripped u off ??

any 256 SD-RAM PC133

[th83]

the company where I bought the printer filed for bankruptcy, I think I know why .

Ok, I'm going to buy any SD-RAM Dimm and test it again.

[th83]

Some (bad) news :

I bought a 256MB SD-RAM PC133 DIMM and add it to the copier (so 2x256MB) : doesn't work : the "boot" loading screen stops nearly 20%.

I bought a 512MB SD-RAM PC133 DIMM and replace the 2x256MB DIMM by the 512MB alone : doesn't work : black screen, like the touchscreen doesn't power on. The LED on the motherboard blincks 10 or 11 times.

Bad luck

But the badest news : when I put only the old 256MB DIMM, the screen still doesn't power on ! I don't know what to do... I hope I didn't "bricked" it with non-original SD-RAM DIMM...

[teckat]

Some (bad) news :

I bought a 256MB SD-RAM PC133 DIMM and add it to the copier (so 2x256MB) : doesn't work : the "boot" loading screen stops nearly 20%.

I bought a 512MB SD-RAM PC133 DIMM and replace the 2x256MB DIMM by the 512MB alone : doesn't work : black screen, like the touchscreen doesn't power on. The LED on the motherboard blincks 10 or 11 times.

Bad luck

But the badest news : when I put only the old 256MB DIMM, the screen still doesn't power on ! I don't know what to do... I hope I didn't "bricked" it with non-original SD-RAM DIMM...

=================================================



Blank LCD With a Green LED is Displayed When the imageRUNNER is Powered On.
is this you

or

No Power and theLCD is Blue

or

No Power, No Display, Control Panel Green LED is On

The All-Night Power Supply protection circuit may be shutting off power to all loads. The RMT1 and RMT2 signals are used to trigger the protection circuit and disable the power supplies.




does the printer warm up ?

[th83]

Hi teckat, thank for answering.

First : good news, the printer working again with the old 256MB DIMM.

So :

With the 512MB DIMM :

LED 1006 is lit (I don't know why the led was blincking last time ?)
Touchscreen isn't power on : black with no backlight.
The printer "move", like it was starting

With the 2x256MB DIMM :

LED 1006 is lit
Touchscreen power on : boot loader is showing progress bar which stops at 15-20%
The printer "move", like it was starting

[teckat]

Hi teckat, thank for answering.

First : good news, the printer working again with the old 256MB DIMM.

So :

With the 512MB DIMM :

LED 1006 is lit (I don't know why the led was blincking last time ?)
Touchscreen isn't power on : black with no backlight.
The printer "move", like it was starting

With the 2x256MB DIMM :

LED 1006 is lit
Touchscreen power on : boot loader is showing progress bar which stops at 15-20%
The printer "move", like it was starting

================================================== ==============


It's a Mystery ==something that is difficult or impossible to understand or explain.


February 22, 2010

imageRUNNER 2270 / 2870 / 3570 / 4570

Memory (RAM) Configuration Change on the imageRUNNER 2270 / 2870 / 3570 / 4570 Models

For manufacturing convenience, the DIMM configuration has been changed from using 2 x 256 MB memory DIMMs (WA7-3296-000) to 1 x 512 MB memory DIMM (WA7-4625-000). Important Notes for Servicing the imageRUNNER 2270 / 2870 / 3570 / 4570 Models: - When replacing a DIMM, use (Qty 1) 512 MB DIMM or (Qty 2) 256 MB DIMM. The 256MB DIMM will continue to be supplied. - Be careful not to install a 512 MB DIMM into a machine with 512 MB already installed. Adding a 128MB, 256MB, or 512MB DIMM into the additional open slot will render the machine inoperative. - The 512MB DIMM can be mounted on either of the slots.

[skynet]

Hi teckat, thank for answering.

First : good news, the printer working again with the old 256MB DIMM.

So :

With the 512MB DIMM :

LED 1006 is lit (I don't know why the led was blincking last time ?)
Touchscreen isn't power on : black with no backlight.
The printer "move", like it was starting

With the 2x256MB DIMM :

LED 1006 is lit
Touchscreen power on : boot loader is showing progress bar which stops at 15-20%
The printer "move", like it was starting

Hi are these experiments with the copier bootrom or the printer one?
You know the machine still works with the original ram and bootrom as a copier only.

[th83]

I tried with both copier and printer bootrom : same problem.

the copier still works with old bootrom and old ram as it was working before.

[th83]

Hi guys,

still the same problem, I don't know what to do

Any ideas ? If you want pics of the printer, just ask.

Do I have to upgrade printer software ?