Results 1 to 8 of 8
  1. #1
    manshack_one
    Guest

    Can't print to new ir2525

    Received 2 identical 2525's at my office. Using same UFR II driver on pc's. Can print to one but not the other. I know the driver is good because it works on one. Could it be that the one that doesn't work didn't get set up correctly before they dropped it off to me? I can get into the web admin on the copier, it's set to a static ip, it will receive faxes.......but I get #853 when i try to print to it. Being that I can print to the other 2525 from this pc but can't print to the 2525 closest to me then logic would tell me there's something wrong on the copier rather than my set up.

    Anything else I can look at from here before calling the Canon rep and listening to him tell me it's a pc issue??

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Oct 2010
    Location
    Kampala, Uganda
    Posts
    860
    Rep Power
    40

    Re: Can't print to new ir2525

    Quote Originally Posted by manshack_one View Post
    Received 2 identical 2525's at my office. Using same UFR II driver on pc's. Can print to one but not the other. I know the driver is good because it works on one. Could it be that the one that doesn't work didn't get set up correctly before they dropped it off to me? I can get into the web admin on the copier, it's set to a static ip, it will receive faxes.......but I get #853 when i try to print to it. Being that I can print to the other 2525 from this pc but can't print to the 2525 closest to me then logic would tell me there's something wrong on the copier rather than my set up.

    Anything else I can look at from here before calling the Canon rep and listening to him tell me it's a pc issue??
    Even Identical Twins are not exactly the same. If your machines came with the CDs, open it up to get the manual for SYSTEM setup, This will guide you to set up the machine properly for printing.

  3. #3
    manshack_one
    Guest

    Re: Can't print to new ir2525

    According to the manuals we are set up correctly. Also, the cd's only provided a 32 bit driver for Windows 7 so we are using the most current 64bit UFRII driver from Canon's website.

    So, if we have it set up correctly, and we are using the correct drivers, and we can successfully print to another identical model copier.......where would you start troubleshooting on the 2525 that we can't print to? Maybe service mode and reset something? I can get into service mode but I can't find a list online that shows me what all the options are so I'm not going to change anything there unless I know what it is I'm changing.

  4. #4
    Senior Tech 250+ Posts
    Can't print to new ir2525

    MunsterTech's Avatar
    Join Date
    Sep 2014
    Location
    limerick
    Posts
    373
    Rep Power
    24

    Re: Can't print to new ir2525

    i take it you are receiving faxes with the G3 fax and not Ifax? Can you ping the machine?

  5. #5
    manshack_one
    Guest

    Re: Can't print to new ir2525

    I can ping it. I can get to the Remote UI via Internet Explorer. On the fax all I can tell you is the phone line plugs directly into the copier so I'm guessing that's the onboard G3?

  6. #6
    Senior Tech 250+ Posts
    Can't print to new ir2525

    MunsterTech's Avatar
    Join Date
    Sep 2014
    Location
    limerick
    Posts
    373
    Rep Power
    24

    Re: Can't print to new ir2525

    did you turn off DHCP if you used it? what hapens when you try to print a test page? when you go into devices, does the printer icon say online? if you go to File and look down is use the printer offline checked? Can you print via usb??

  7. #7
    Field Supervisor 500+ Posts
    Can't print to new ir2525

    Herrmann's Avatar
    Join Date
    Jan 2006
    Location
    Germany, NorthRhine Westfalia
    Posts
    792
    Rep Power
    45

    Re: Can't print to new ir2525

    from the canon universal send error codes list:

    #853
    Cause Remedy
    -Using the wrong printer driver.
    -The machine does not have the proper printer kit installed (e.g.
    UFR, PCL, PS kit(s)).
    -The print job did not print because due to lack of
    resources on the printer (e.g. memory, HD space, etc).
    -Print spooler on the machine is full.
    -The number of secure print jobs have exceeded the
    maximum limit that can be reserved at this time.
    -Make sure that the printer driver that you’re using is the correct
    one for the operating system on the computer that you are
    printing from and specific to the printer model that you’re printing
    to.
    -Check and verify that the correct and the required printer kit is
    Installed (e.g. UFR, PCL, PS kit(s)).
    -Reduce the number of pages to print.
    -Erase unnecessary jobs that are stuck or in reserve.
    -Turn off spooler on the printer, ADDITIONAL FUNCTION >
    SYSTEM SETTINGS > NETWORK SETTINGS > USER
    SPOOLER, set this value to OFF.
    -Print out or erase secured print jobs that are stored or waiting to
    be printed on the machine.
    -Try printing again when other jobs have completed printing.

    hope this helps.

    maybe the second unit is a copier at all and has no license to print?
    If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!

  8. #8
    Service Manager 10,000+ Posts
    Can't print to new ir2525

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Can't print to new ir2525

    Does the processing data light turn on,_?

    Question :
    How are the installed and enabled licensed based options for the device determined?

    ######## ;-\
    Currently the items that are LMS Activated for this particular device series are as follows:

    Optional Feature Sales Part Number
    PCL Printer Kit-AF1 2860B001AA
    PS Printer Kit-AF1 2861B001AA
    Color Send Kit-Y1 2862B002AA
    Searchable PDF Kit-C1 3912B002AA










    The method of confirming license option could be made whether the license option is active or not in the ACTIBAT FUNCTION item by printing out the SPEC REPORT from the service mode.

    To print out the SPEC REPORT:
    (1) Enter the service mode. Push [Additional Functions] Key > push 2, 8 Keys (in succession) > push [Additional Functions] Key.

    (2) Push cursors, and display [#REPORT]. Then press [OK].

    (3) Push cursors, and display [#REPORT OUT PUT]. Then press [OK].

    (4) Push cursors, and display [#SPEC LIST]. Then press [OK]. The 'SPEC REPORT' will be printed out.

    (5) Check the items displayed under ACTIBAT FUNCTION in SPEC REPORT. ACTIBAT FUNCTION > - BW-SEND - CL-SEND Items for which ON/ON is displayed are validated.



    imageRUNNER 2525 / 2530 / 2535 / 2545
    Currently the items that are LMS Activated for this particular device series are as follows:

    Optional Feature Sales Part Number
    PCL Printer Kit-AF1 2860B001AA
    PS Printer Kit-AF1 2861B001AA
    Color Send Kit-Y1 2862B002AA
    Searchable PDF Kit-C1 3912B002AA







    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here