Is there a touch screen calibration for this one. Thx
Is there a touch screen calibration for this one. Thx
[[[[[[[[[[[[[[[[[[[[[;-D)
SERVICE MODE>
COPIER > FUNCTION > PANEL >TOUCHCHK
Adjusting the coordinate positions on the analog touch panel
<Operating procedure>
- Align the press positions on the touch panel and the coordinate positions on the LCD section.
- If the LCD section has been replaced, execute this service mode.
1) Select TOUCHCHK to reverse its display. Then press the OK key.
2) Press sequentially the nine positive signs (+) that appear on the touch panel in order.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Found it yesterday. Thx much
Bookmarks