Originally Posted by
teckat
changing the value of FX-FL-SP in service mode LEVEL 2 to +3.
To change the value of FX-FL-SP in service mode, perform the following.
Service Mode> to Service Mode LEVEL 2 > COPIER > ADJUST > FIXING>FX-FL-SP
Note:
The definition for FX-FL-SP is as follows:
Use it to enter a fine adjustment value for the fixing film speed when plain paper is used. Make a fine adjustment of the target control speed for the fixing film speed when plain paper is used.
Setting range: -3 to 3 (Default: 0) (Unit: ms)
Bookmarks