trap c 124 ir 5000

[Jerrygbs]

Im getting a message on the display of a IR5000 with a Fiery connected, trap c 124, machine is printing fine but the message is worrying me. I know the machine is old but she is a tank, any help appreciated.

[teckat]

Im getting a message on the display of a IR5000 with a Fiery connected, trap c 124, machine is printing fine but the message is worrying me. I know the machine is old but she is a tank, any help appreciated.

========================

Trap.c:124

This error should not effect the machine's printing functionality. To clear out the message, perform the following steps:

1. Hit the Additional Functions button.

2. Select System Settings.

3. The Clear Message Board button should be selectable (not grayed out). Press Clear Message Board, then hit OK and the Trap message on the display will be cleared out. * Another workaround would be to go into the RUI and disable the Message Board Settings for that equipment.
* Note - After clearing out the error, it should not reappear.

---