Results 1 to 3 of 3
  1. #1
    Trusted Tech 50+ Posts imagewalker's Avatar
    Join Date
    Jun 2010
    Posts
    94
    Rep Power
    0

    iR5055 Second side lead edge, Light copy

    iR5055 Second side lead edge, Light copy.

    I jammed the machine, found a sheet in the duplex tray 2.
    It had two "2 Inch" dents in the paper about "1 inch" from the lead edge of the copy.

    I seen this before in the iR5070 and it was the exit one way bearing with gear.
    and remember there was something else but i've forgotten its been so long....
    One way bearing i cleaned and tested doesn't seem to be the problem, looks like new. No wear on the exit shaft either. The white lever on the exit jam release cover (always cracks) that works the guide into tray 2 is fine as well.
    Any other ideas

    Hope that all makes sense, my ingrish no good today...lol
    Thanks in advance

    IW

  2. #2
    Service Manager 10,000+ Posts
    iR5055 Second side lead edge, Light copy

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: iR5055 Second side lead edge, Light copy

    Quote Originally Posted by imagewalker View Post
    iR5055 Second side lead edge, Light copy.

    I jammed the machine, found a sheet in the duplex tray 2.
    It had two "2 Inch" dents in the paper about "1 inch" from the lead edge of the copy.

    I seen this before in the iR5070 and it was the exit one way bearing with gear.
    and remember there was something else but i've forgotten its been so long....
    One way bearing i cleaned and tested doesn't seem to be the problem, looks like new. No wear on the exit shaft either. The white lever on the exit jam release cover (always cracks) that works the guide into tray 2 is fine as well.
    Any other ideas

    Hope that all makes sense, my ingrish no good today...lol
    Thanks in advance

    IW
    -------------------------------------------------------------------------


    The external delivery assembly may be warped > causing the paper to get nick.
    External delivery guide, part number FL2-3993-000

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Trusted Tech 50+ Posts imagewalker's Avatar
    Join Date
    Jun 2010
    Posts
    94
    Rep Power
    0

    Re: iR5055 Second side lead edge, Light copy

    Yeah it was a deformed guide going into UNIT 2....Did 200 hundred double side copies.
    was ok when i left.....IW

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here