Need canon4225 number plate number( ECO ID PCB Part Numbers )E350 thANK ! urgent
Thanks: 0
Likes: 0
Dislikes: 0
Need canon4225 number plate number( ECO ID PCB Part Numbers )E350 thANK ! urgent
================================================== ===Originally Posted by ts-lx
U can only order an ECO BOARD from Canon Tech Support Office/
ECO ID PCB continues to be a restricted part
DO NOT CHANGE TWO OR MORE BOARDS AT ANY ONE TIME. THIS CAN RESULT IN THE
EQUIPMENT ENTERING AN ERROR CODE LOOP. ONCE THIS OCCURS, YOU MUST CONTACT THE
CANON TECHNICAL SUPPORT CENTER FOR ASSISTANCE.
ECO ID PCB and cannot be swapped with one from any other engine.
imageRUNNER ADVANCE 4025 * 4035 * 4045 * 4051 * 4225 * Error Code E350
error code E350 occurs when the machine is powered on.
With the main power switch off, Remove & Re-seat connector J8134 on Main Controller PCB 2 and connector J1 on Serial Number PCB. //
Power back up
The following photo shows the location of the two PCB's and connectors.
E350.JPG
Last edited by teckat; 10-23-2014 at 06:18 AM.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
The ECO ID PCB is broken Would like to order without a number================================================== ===
imageRUNNER ADVANCE 4025 * 4035 * 4045 * 4051 * 4225 * Error Code E350
error code E350 occurs when the machine is powered on.
With the main power switch off, Remove & Re-seat connector J8134 on Main Controller PCB 2 and connector J1 on Serial Number PCB. //
Power back up
The following photo shows the location of the two PCB's and connectors.
E350.JPG
thank you
You are in that country, the absolute master
ir-4225_eco id pcb.JPG
捕获.JPG
THAT IS NOT THE ECO ID PCB
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
BOTTOM LINE IS-----------
U can only order an ECO BOARD from Canon Tech Support Office/
ECO ID PCB continues to be a restricted part
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
thank yuo
Posting Permissions
Reply With Quote
Bookmarks