10676146_10205134411538136_4583955329152703879_n.jpg
10530869_10205134411258129_8182060473945990269_n.jpg
The example and test PG10 as above, please advise.Thank you
10676146_10205134411538136_4583955329152703879_n.jpg
10530869_10205134411258129_8182060473945990269_n.jpg
The example and test PG10 as above, please advise.Thank you
Hi, it could be useful
IRC2380 Poor Black Solids
Once all of the above is done...... it has been said that it could be HVT 2 (high voltage pcb number 2 )(FK2-0489-000).
All the best
Yes this is the same fault I have, not quite as bad, I would start with a new OEM drum, even if it is not yet up to 100% if the drum fixes the fault you can rule out a charge/HVT fault.
If the fault returns look at toner supply issues.
What does the K DENS % show? should be around 0%, -4% means low black toner density
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks