need help.. how to clean developer ir6570

**813200217** · 10-30-2014

toner ink get into unit 1, so i need to clean, how to do it?
after some time it became so much ink

**DAG COPIERS & COMPUTERS** · 10-31-2014

Originally Posted by 813200217

toner ink get into unit 1, so i need to clean, how to do it?
after some time it became so much ink

You need to use a 'Common sense approach' to this problem! First observe and establish or identify the source of the toner leakage and why; cleaning the developing unit is not a big deal, remove it from main unit, empty it of toner , using a blower remove any residual toner on cylinder, then use a solution of 'Brasso' on a piece of rug to wipe and 'polish' the magnetic cylinder. Allow to dry, re-polish and you are done.

**Brian8506** · 10-31-2014

Check the pre transfer assembly. Vacuum it out. May have to replace scraper blade in there. Probably spilling down to t/s unit

**V-P** · 11-01-2014

Originally Posted by DAG COPIERS & COMPUTERS

You need to use a 'Common sense approach' to this problem! First observe and establish or identify the source of the toner leakage and why; cleaning the developing unit is not a big deal, remove it from main unit, empty it of toner , using a blower remove any residual toner on cylinder, then use a solution of 'Brasso' on a piece of rug to wipe and 'polish' the magnetic cylinder. Allow to dry, re-polish and you are done.

First time I hear about this. Why in magnetic cylinder ?

**813200217** · 11-01-2014

can anyone upload the video in yooooooooooutube how to clean the developing?
i want to try clean it by myself..

**DAG COPIERS & COMPUTERS** · 11-02-2014

Originally Posted by V-P

First time I hear about this. Why in magnetic cylinder ?

Developing cylinder! I thought the poster wants to know how to clean the developing assembly...and that would involve emptying off toner, i suppose? Sorry, seem to have misinterpreted his post.