Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 23
Canon ImageRunner 3025 Jams at Fuser
Hi everyone. I have a Canon ImageRunner 3025 that is jamming at fuser. The paper comes up about an inch passed the fuser and the remaining is fan folded in the fusing unit. I had replaced the fixing film and put new film grease on it. When I remove the fixing assembly and turn it by hand the film is not turning with the pressure roller. I had another unit from a different copier and put that in. Still exact jam type. The jam codes that i keep getting are 107, 108 and 109.
Any help is much appreciated!! Thanks in advance!!
-
Re: Canon ImageRunner 3025 Jams at Fuser
J108,107=
First--
Remove the damper pads for the fixing delivery reversal flapper
Check to make sure the Locking Plate on is installed in the correct position _see link pic below_______
https://lh5.ggpht.com/fphOQr9MEfBLvg...D0JPrPO1wr=s85
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
-
Field Supervisor
500+ Posts
- Rep Power
- 34
Re: Canon ImageRunner 3025 Jams at Fuser
107 jam
first of all make sure that you have update the latest version of the software then at the body theres some values must change it to increase the fuser degree i will send it for u send me ur mail
Distinguished road makes you jewel in rough
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks