Canon IR 3045 paper folder

[masyuk]

Hi guys.. I'm facing this small z fold at middle of paper when use this machine. Can some one suggest what to do. Thanks.

[teckat]

Hi guys.. I'm facing this small z fold at middle of paper when use this machine. Can some one suggest what to do. Thanks.

----------
All paper sizes_?
Finisher attached_?


Does the Z fold occur after registration and before delivery.?👀

😎Service Mode: COPIER > ADJ > FEED ADJ > LOOP CST.
Try & Set Loop CST to a lower value.

Note:
The default is 63; with a range of -128 to +127.

[masyuk]

Yes teckat. All paper size. Folded at registration roller. This machine doesn't have finisher. I suspected the registration not working.

[teckat]

Yes teckat. All paper size. Folded at registration roller. This machine doesn't have finisher. I suspected the registration not working.

Try that loop setting first 👀

[masyuk]

----------
All paper sizes_?
Finisher attached_?


Does the Z fold occur after registration and before delivery.?👀

😎Service Mode: COPIER > ADJ > FEED ADJ > LOOP CST.
Try & Set Loop CST to a lower value.

Note:
The default is 63; with a range of -128 to +127.

Thanks for your advise.