my canon ir4570 jamming before the paper entering the finisher help me
my canon ir4570 jamming before the paper entering the finisher help me
Check the fixing sensor some time theres a small plastic its the stopper of the sensor it could be broke,do u checked the drawer if its same size display on screen.
Distinguished road makes you jewel in rough
i already Check it, the paper size not a problem, paper thickness also not a problem(i copy using 120gsm paper but also jam on the same place), i also replace the sensor (above the fixing unit) ..but still the same, any other way to fix this?
it posble that the FH6-5005-000 1 CLUTCH, ELECTRO MAGNETIC CL6 J3601 is broken??
Will the machine feed any paper through, eg from the stack feed, 2nd draw etc or does it jam every single copy?
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Duplex or simplex?
I've had this on 3 seperate occasions.
One was Simplex and it was coming from the bypass tray. Only resolve was to replace the Manual paper feed assembly.
Second was the rollers were worn from all the cassettes causing delays. Right in the same spot as your picture. The bypass was working fine. (the tech before me used some Aftermarket rollers)
third was the fixing unit was defective.
Bookmarks