I'm new to this and trying to locate the pre transfer scraper on 3220
I'm new to this and trying to locate the pre transfer scraper on 3220
Maybe the parts manual could help you?
http://marjorie.free.fr/Parts%20cata...irc3200-pc.pdf
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Yes, thank you very much. I will take a look at the manual.
I appreciate the help.
I'm having rub and scratch marks that are still there after changing
the belt so I figured it was a cleaning blade. An old tech left part #
FF5-7934-000 here from a past job and it says scraper, pre-transfer
but now I think it was for another machine?
sample1a.pdf
First u need to remove the ITB UNIT,
then u need to remove both metal plates from ITB underside & wipe clean.
Next remove all drums & toners, slide out fuser unit, remove cleaning blade assembly,_take a flashlight look inside cavity towards where cleaning unit slides in, u will see a mess of waste build up along length of rail.
Best to vacuum out, if u try to wipe clean mess will fall down into unit.
With no vacuum, u need to gut & remove all assemblys'
before cleaning (place paper on bottom >then wipe along rail.
Replace cleaning blade unit with a new one.
FG6-8989-030
Replace metal plates on ITB.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks