I ran into a Canon ir1740 that skews about a 1/4 inch per 11 inches. No idea why. Same out of all 4 trays.Only 26k on machine.The paper is skewing.???
Thanks: 0
Likes: 0
Dislikes: 0
I ran into a Canon ir1740 that skews about a 1/4 inch per 11 inches. No idea why. Same out of all 4 trays.Only 26k on machine.The paper is skewing.???
=======================Originally Posted by tomcatt
is this on Prints & Glass Copies ?
are u sure it's not the image on paper that is skewing ???
actual paper skew>usually/ eventually causes jams
post examples
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
I get the skew on prints as well as copies. The skew is not on the paper. The paper actually skews as it goes through the machine. I believe the skew is created at the reg roller
Time to get down & pull out units for inspection 😖
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Re: canon ir1740 skew
I took a look again and noticed a clip and spring assembly missing on one side giving pressure to the reg roller. got one on order .should fix it
That'll do it
Reply With Quote
Bookmarks