Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17
  1. #11
    Technician satitjangdee's Avatar
    Join Date
    Jun 2011
    Location
    Roi-Et
    Posts
    49
    Rep Power
    27

    Re: 355-001 after replace HD on IR5020i

    I get as below.
    picture.JPG

  2. #12
    Service Manager 10,000+ Posts
    355-001 after replace HD on IR5020i

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: 355-001 after replace HD on IR5020i

    Quote Originally Posted by satitjangdee View Post
    I get as below.
    picture.JPG
    **********
    As i posted>> both series_5000\6000 & 5020\6020 use the same Main Controller PCB.

    (:~

    U never go by the label or stamp imprints of part numbers on a board.

    U either have it from it's original box, or it has a repair tag attached.

    I have never seen or have any records of that part # u posted.
    It's not even found on a google search��
    Last edited by teckat; 12-17-2014 at 05:12 PM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #13
    Technician satitjangdee's Avatar
    Join Date
    Jun 2011
    Location
    Roi-Et
    Posts
    49
    Rep Power
    27

    Re: 355-001 after replace HD on IR5020i

    Quote Originally Posted by teckat View Post
    **********
    As i posted>> both series_5000\6000 & 5020\6020 use the same Main Controller PCB.

    (:~

    U never go by the label or stamp imprints of part numbers on a board.

    U either have it from it's original box, or it has a repair tag attached.

    I have never seen or have any records of that part # u posted.
    It's not even found on a google search��
    Thank you so much.

    So, do these series use the same system software as 5020i?
    I had buy HDD with ir 5020i system software installed, it get code 355-002.
    But when I changed to another HDD that I borrowed from friend (machine look like the same), it get code 740-002.

    Thank again for your information.

  4. #14
    Service Manager 10,000+ Posts
    355-001 after replace HD on IR5020i

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: 355-001 after replace HD on IR5020i

    5020\6020 firmware is different than 5000\6000 firmware.

    E740

    The copier must have the new style Ethernet Board PCB (NIC) installed.
    If the copier's firmware (system software) is not up to date, an E740 code will be displayed when the new style NIC is installed in the copier.
    The solution is to simply update the copier's firmware to the latest versions.

    iR5000\6000
    needs _ver.20.01
    -----------------------------------------
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #15
    Technician satitjangdee's Avatar
    Join Date
    Jun 2011
    Location
    Roi-Et
    Posts
    49
    Rep Power
    27

    Re: 355-001 after replace HD on IR5020i

    Quote Originally Posted by teckat View Post
    5020\6020 firmware is different than 5000\6000 firmware.

    E740

    The copier must have the new style Ethernet Board PCB (NIC) installed.
    If the copier's firmware (system software) is not up to date, an E740 code will be displayed when the new style NIC is installed in the copier.
    The solution is to simply update the copier's firmware to the latest versions.

    iR5000\6000
    needs _ver.20.01
    -----------------------------------------

    If I take off LAN Card (don,t need), can solve this problem?

  6. #16
    Service Manager 10,000+ Posts
    355-001 after replace HD on IR5020i

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: 355-001 after replace HD on IR5020i

    Quote Originally Posted by satitjangdee View Post
    If I take off LAN Card (don,t need), can solve this problem?
    ==========================
    u can do as u please //You will NOT have the ability to enter the IP Address


    u don't know what ver of firmware is on HDD

    Minimum firmware versions to recognize the New Style Ethernet Board (FG6-9898-000):

    Without these System Software & BootROM upgrades, a symptom of E740 will occur.

    Model( MN-CONT (system software):
    BOOT-ROM:

    imageRUNNER 5000 19.02 or higher 14.54 or higher

    ================================================== ==========================================
    How to identify the old and new Ethernet Board PCB assemblies:
    Either of the following part numbers is silk-screen printed on the PCB.
    Old Part: FG3-1186*
    New Part: FG3-3326*

    * These part numbers are manufacturing numbers only and are NOT valid for ordering.

    NIC.jpg


    Old Ethernet Board PCB Assembly FG6-5964-000=Interchangeability =Yes

    New Ethernet Board PCB Assembly FG6-9898-000 =Interchangeability=Yes



    READ ATTACHED PDF-------

    Attached Files Attached Files
    Last edited by teckat; 12-18-2014 at 04:57 PM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #17
    Technician satitjangdee's Avatar
    Join Date
    Jun 2011
    Location
    Roi-Et
    Posts
    49
    Rep Power
    27

    Re: 355-001 after replace HD on IR5020i

    Thank so much.

    You great.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here