canon clc 3220

[aminedbk]

i have a strange problem with my clc 3220 error code for black dram
i change the dram with an original one it print about 50 A4 color
then i have a (flou) like a duplicate black color i made a gradetion
became ok for 10 copies and need gradation againe
can please any one help me thanks

[teckat]

Remove ITB, clean or replace underside of sheet, clean the large black rubber roller.
Put back the ITB>

Then do a Reg-clear in service mode level 2.
After clearing, run quick autogradation then full adjust.

* If this does not work do a dc-cont clear in SM level 1. Always run a P-Print before clearing any of the control boards.
After clearing dc-cont, turn off copier, open front door, turn on copier, re-enter info from P-Print or from door specs (in cover inside front door. Restart copier, run autogradation.

Then print out type 6 test page and check to see if all colors are uniform.

[aminedbk]

i clean the ITB
and i enter SM and do a D con clear
all is good now
tanks for help

[teckat]

i clean the ITB
and i enter SM and do a D con clear
all is good now
tanks for help

===========================

good,thank you

?? did u remember to put back the P PRINT SPECS

[aminedbk]

YES my friend thank you