One of our company's 2380 doesn't see it's new cartridge of staples anymore. i've had a look at it, and it doesn't seem to transport the staples to the front any more... I thing the spring is worn or alike..
But i can't find the partno for the holder, can anyone help me ?
Oh i'm sorry. It's the 3580 that has the problem. It only has an inner finisher...
================================================== ========================================Originally Posted by JPiek
READ ATTACHED PDF ON Z1 FAILURE & SERVICING PROCEDURE:
It is possible that the Tension Spring part number FU5-2267-000 inside Internal Finishers-P1/Z1 may be too
weak to allow the Stapling HP (Home Position) Sensor Flag part number FC5-4498-000 to return to home
position in a timely manner. When this occurs, there is a stapling failure.
To minimize the aforementioned symptom from occurring, a new stronger Tension Spring is being issued
for field retrofit.
FINISHER-Z1 Number of trays= One stack tray (Inner)
#7 has the stapler holder==
FM2-0665-000 STAPLE UNIT/ M9
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
that is not the problem, i switched holders with our other printer and it's working fine now....
On the drawing it's no 7 i thing, this is the part i mean :
Oh, and someone left the band around it when refilling, guess it jammed...
Pff, ehat am i thinking, it's no 43 in the picture... But it's solved, we had an old 4080 that's written-off and i took the holder from that one....
Cartridge Holder for Staples
#43
FC5-4546-000 / CARTRIDGE, STAPLER
cost between> 80.00>90.00 US
see pic below
================================================== ================================================== =======================================
#7 in pic> is the Stapler Unit_comes with Motor & Cartridge Holder
expensive
Stapler Unit.jpg
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Posting Permissions
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks