Canon IR2200 taking too long to warm Up?

[teckat]

The funny thing is that it comes "ready" and boots up....I think I am going to just upgrade them!
Thank you for all the replies.
Doug

******
U never answered my ????
What does the control panel message or\ displaying show______
?? a Slow Progress bar, Warming up, Wait or other indication.

Reason for no error 000,001,002 is because film has reached the required temps of >70>100>165 in their allotted time.
Otherwise u would receive codes.

Only model \series I have seen stuck in warm-up without e_codes is the iRC 3200\5180 color boxes, this is because of old drum phenomenon.

[doug]

It is just a slow progress bar and finally comes ready after 2:35 minutes-no codes, very odd.
Thank you
Doug

[teckat]

It is just a slow progress bar and finally comes ready after 2:35 minutes-no codes, very odd.
Thank you
Doug

*****

Progress Bar has nothing to do with Printer Warm-Up, that's why u don't get fixing error codes

That is showing Boot Up Process ( HDD )\ ( Memory Dimm). , besides listed, there are numerous other factors that could effect slow progress .

?? Do u have a Fax Board installed in this unit_?

[doros]

faulty hard disc may be

[doug]

*****

Progress Bar has nothing to do with Printer Warm-Up, that's why u don't get fixing error codes

That is showing Boot Up Process ( HDD )\ ( Memory Dimm). , besides listed, there are numerous other factors that could effect slow progress .

?? Do u have a Fax Board installed in this unit_?

No fax board installed (no options at all) Im thinking HDD too,,,,
Thank you
Doug

[doug]

faulty hard disc may be

Im thinking HDD too....
Thank you for your input.
Doug