Canon IR 5065 detects A4R as A3

[omni]

Hallo, there is a problem with IR 5065, when I put A4R originals in DADF they detects as A3 and I have A3 copies in output tray.
Anyone know something about this problem

[teckat]

Hallo, there is a problem with IR 5065, when I put A4R originals in DADF they detects as A3 and I have A3 copies in output tray.
Anyone know something about this problem

------------------------------------------------

need to perform a DADF width adjustment

In Service Mode
COPIER > FEEDER > FUNCTION

First=
SENS-INT = Use it to adjust the sensitivity of individual sensors of the ADF.
Be sure to clean the sensor area before executing the item.
Procedure
1) Select the item, and press the OK key.
2) See that the execution ends automatically.

Then do>>>>>>>>>>>>>>>
TRY-A4 = Use it to execute automatic adjustment of paper width detection reference point 1 of the
ADF original pickup tray. (A4)

TRY-A5R = Use it to execute automatic adjustment of paper width detection reference point 2 of the
ADF original pickup tray. (A5R)

TRY-LTR = Use it to execute automatic adjustment of paper width detection reference point 1 of the
ADF original pickup tray. (LTR)

TRY-LTRR = Use it to execute automatic adjustment of paper width detection reference point 2 of the
ADF original pickup tray. (LTRR)


DADF TRAY

Cross-feed direction
checks the width of the original placed in the original pickup tray.
Sensor used=original width volume (VR1)

identification between_ A4R/A5R and LTRR/ STMTR
Sensor used= AB/inch sensor

[omni]

------------------------------------------------

need to perform a DADF width adjustment

In Service Mode
COPIER > FEEDER > FUNCTION

First=
SENS-INT = Use it to adjust the sensitivity of individual sensors of the ADF.
Be sure to clean the sensor area before executing the item.
Procedure
1) Select the item, and press the OK key.
2) See that the execution ends automatically.

Then do>>>>>>>>>>>>>>>
TRY-A4 = Use it to execute automatic adjustment of paper width detection reference point 1 of the
ADF original pickup tray. (A4)

TRY-A5R = Use it to execute automatic adjustment of paper width detection reference point 2 of the
ADF original pickup tray. (A5R)

TRY-LTR = Use it to execute automatic adjustment of paper width detection reference point 1 of the
ADF original pickup tray. (LTR)

TRY-LTRR = Use it to execute automatic adjustment of paper width detection reference point 2 of the
ADF original pickup tray. (LTRR)


DADF TRAY

Cross-feed direction
checks the width of the original placed in the original pickup tray.
Sensor used=original width volume (VR1)

identification between_ A4R/A5R and LTRR/ STMTR
Sensor used= AB/inch sensor

Thanks a lot I'll try to do this.

I have image press 1100 with the same problem, can I apply this procedure to 1110 machine?

[teckat]

Thanks a lot I'll try to do this.

I have image press 1100 with the same problem, can I apply this procedure to 1110 machine?

----------------------------------------------------------------------------

image Press series is a different animal >>> time to get a MANUAL

Service Mode > FEEDER > OPTION

SIZE-SW= ON/OFF of AB/INCH type mixed mode detect
Lv.1 Details = Set ON/OFF for mixed loading detection of AB-size and INCH-size group documents.
Use case = To enable mixed loading of AB-group and Inch-group documents
Adj/set/operate method= Enter the setting value and press the OK key.
Display/adj/set range = 0: OFF (Do not enable mixed loading), 1: ON (Enable mixed loading)


Service Mode > FEEDER > DISPLAY

TRY-WIDE= Distance of original width detect slider
Lv.1 = Details Display the distance between the document width detection sliders.
Use case = When a failure occurred in document size detection
Adj/set/operate method = Check whether or not the value matching the slide position is displayed when the document width slider is moved to the specified
size width position.
Display/adj/set range= 0 to Approx. 2970
Unit = 0.1 mm

Service Mode > FEEDER > FUNCTION

SENS-INT= Initialization of DADF sensor
Lv.1 Details = Initialize DADF sensors.
Use case At the time of replacement of the reader controller PCB / post separation sensor 1 (SR2) / post-separation sensor 2 (SR3) / postseparation sensor 3 (PCB2) / registration sensor (PCB3) / read
sensor 1 (PCB4) / read sensor 2 (SR5)
Adj/set/operate method= Enter the value and press the OK key

TRY-A4 = Adj of DADF tray width detect ref 1: A4
Lv.1 Details = Automatically adjust the paper width detection reference point 1 for the DADF document feed tray. (A4)
Use case • At the time of replacement of the document width volume (VR)
• At the time of replacement of the reader controller PCB / clearing of RAM data

TRY-A5R = Adj of DADF tray width detect ref 2: A5R
Lv.1 Details = Automatically adjust the paper width detection reference point 2 for the DADF document feed tray. (A5R)
Use case • At the time of replacement of the document width volume (VR)
• At the time of replacement of the reader controller PCB / clearing of RAM data

TRY-LTR = Adj of DADF tray width detect ref 1: LTR
Lv.1 Details Automatically adjust the paper width detection reference point 1 for the DADF document feed tray. (LTR)
Use case • At the time of replacement of the document width volume (VR)
• At the time of replacement of the reader controller PCB / clearing of RAM data

TRY-LTRR = Adj of DADF tray width detect ref2: LTRR
Lv.1 Details = Automatically adjust the paper width detection reference point 2 for the DADF document feed tray. (LTRR)
Use case • At the time of replacement of the document width volume (VR)
• At the time of replacement of the reader controller PCB / clearing of RAM data