Thanks: 
Likes: 
Dislikes: I am having a problem with the Canon IR 7105, it displays the Error E110 right after booting up. I want to replace the laser unit with another unit from a working copier. does anyone have a manual on how to remove it?
I am having a problem with the Canon IR 7105, it displays the Error E110 right after booting up. I want to replace the laser unit with another unit from a working copier. does anyone have a manual on how to remove it?
--------------------Originally Posted by manuelubau
E110 - The laser scanner motor rotation has a fault.
= 0000 After the laser scanner motor has gone on, the PLL lock signal of the motor is not detected for 15 sec or more.
-Check to see if all covers have been attached to the primary charging assembly.
-Disconnect and then connect J764 of the laser scanner motor drive PCB (in the laser scanner unit).
-Disconnect and then connect J1401 of the video PCB.
-Disconnect and then connect J506 of the DC controller PCB.
-Replace the laser scanner unit.
-Replace the video PCB.
-Replace the DC controller PCB
SEE ATTACH
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
--------------------
E110 - The laser scanner motor rotation has a fault.
= 0000 After the laser scanner motor has gone on, the PLL lock signal of the motor is not detected for 15 sec or more.
-Check to see if all covers have been attached to the primary charging assembly.
-Disconnect and then connect J764 of the laser scanner motor drive PCB (in the laser scanner unit).
-Disconnect and then connect J1401 of the video PCB.
-Disconnect and then connect J506 of the DC controller PCB.
-Replace the laser scanner unit.
-Replace the video PCB.
-Replace the DC controller PCB
SEE ATTACH
I tried all the above! now that I replaced the laser scanner unit, I get error E102-0001... any ideas on what it could be? I swapped the laser unit with another machine and that is all I did...
************************************************** ************
E102 = A read error has occurred in relation to the laser scanner unit EEPROM data.
0001 / The correction data cannot be read from the EEPROM of the laser scanner unit.
-Disconnect and then connect the connector of the video PCB.
-Disconnect and then connect the DC controller PCB.
-Replace the laser scanner unit.
U need to re check all your connections
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
do you think I can try a laser unit from a IR 7095 and put it in a IR 7105... I checked and the unit is identical... would it work??************************************************** ************
E102 = A read error has occurred in relation to the laser scanner unit EEPROM data.
0001 / The correction data cannot be read from the EEPROM of the laser scanner unit.
-Disconnect and then connect the connector of the video PCB.
-Disconnect and then connect the DC controller PCB.
-Replace the laser scanner unit.
U need to re check all your connections
Laser unit iR7105_ iR7095_ iR7086: Laser scanner assembly
Same Dog🐕
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
To be have service manual for any thing you want please follow the following link:
https://www.scribd.com
then register and you can download service manual for canon IR 7105.
With my greetings.
***********
They don't have everything_+ u need to contribute after u register.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
So what to contribute.
go to it's website for information
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Posting Permissions
Reply With Quote
Bookmarks