Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Technician
    Join Date
    Nov 2013
    Posts
    10
    Rep Power
    22

    Ir4570 problem on print double sided

    I found problem in print double sided with IR4570. on first page at right position to thin. second page is ok.
    Printing single page ok.

    double sided_Page_1.jpgdouble sided_Page_2.jpg

  2. #2
    Service Manager 10,000+ Posts
    Ir4570 problem on print double sided

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Ir4570 problem on print double sided

    Quote Originally Posted by jaruwit View Post
    I found problem in print double sided with IR4570. on first page at right position to thin. second page is ok.
    Printing single page ok.

    double sided_Page_1.jpgdouble sided_Page_2.jpg
    ================================================== ==========================



    are u scanning these pages in with DF ???
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Trusted Tech 50+ Posts Tonersniffer's Avatar
    Join Date
    Nov 2012
    Posts
    71
    Rep Power
    25

    Smile Re: Ir4570 problem on print double sided

    1. Change in SM Copier>Adjust>HV>TR-TP-LV to 0



    You might need to change the below setting but I doubt it:
    Change in SM Copier>Option>combo TR-SW1 through TR-SW5 to read 0 when you press TR-SW1 through TR-SW5.

    If it is humid and the paper jams in the drum unit, You might want to change this back.

    Help this helps.

    Tonersniffer

  4. #4
    Master Of The Obvious 10,000+ Posts
    Ir4570 problem on print double sided

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: Ir4570 problem on print double sided

    It looks to me like flip.

    Especially when doing two-sided with moist/curly paper, the first side curls left. When inverted the second side approaches the drum with a right curl. As the trail edge of the paper passes it pulls away from the drum before it is fully transferred.

    The simplest solution is to carry in a fresh ream of properly stored paper, crack it open and run duplex test images. If it's really flip, the fault will be gone. Then you can advise them on proper methods of storing paper. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Technician
    Join Date
    Nov 2013
    Posts
    10
    Rep Power
    22

    Re: Ir4570 problem on print double sided

    Quote Originally Posted by teckat View Post
    ================================================== ==========================



    are u scanning these pages in with DF ???
    Yes I can from df?
    Image is as same as paper.
    I print on two machine IR4570. It the same result.

    I think. I ever found some document about this from canon Service Bulletin. But I lost it.
    There are change about electrode plate or some thing like that.

  6. #6
    Technician
    Join Date
    Nov 2013
    Posts
    10
    Rep Power
    22

    Re: Ir4570 problem on print double sided

    Quote Originally Posted by Tonersniffer View Post
    1. Change in SM Copier>Adjust>HV>TR-TP-LV to 0



    You might need to change the below setting but I doubt it:
    Change in SM Copier>Option>combo TR-SW1 through TR-SW5 to read 0 when you press TR-SW1 through TR-SW5.

    If it is humid and the paper jams in the drum unit, You might want to change this back.

    Help this helps.

    Tonersniffer
    It work. change Copier>Adjust>HV-TR>TR-TP-LV to 0
    thank you.


  7. #7
    Trusted Tech 50+ Posts Tonersniffer's Avatar
    Join Date
    Nov 2012
    Posts
    71
    Rep Power
    25

    Re: Ir4570 problem on print double sided

    It looks to me like flip.

    Especially when doing two-sided with moist/curly paper, the first side curls left. When inverted the second side approaches the drum with a right curl. As the trail edge of the paper passes it pulls away from the drum before it is fully transferred.

    The simplest solution is to carry in a fresh ream of properly stored paper, crack it open and run duplex test images. If it's really flip, the fault will be gone. Then you can advise them on proper methods of storing paper.


    BlackCat,

    I agree with your flip theory on machines with corona wires for seperation but the same theory for machines with transfer rollers you might want to reconsider.

    Sincerely
    Tonersniffer

  8. #8
    Junior Member JoMaq's Avatar
    Join Date
    Jun 2015
    Location
    manila
    Posts
    6
    Rep Power
    0

    Re: Ir4570 problem on print double sided

    Good day! I have a problem in printing from PC to IR4570 double sided, in that the 2nd page, the copy was upside down. Is there work around? Thanks in advance.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here