Canon iR1023J Feed clutches and registration won't turn On

[rapidocument]

Hello guys,

This machine won't feed from either cassette or bypass and if you manually open the bypass solenoid it feeds up to registration but reg. clutch won't activate, I already checked LVPS good and I am hesitating to change Main board or update the Firmware but, although I have the SST tool I didn't bring the FW for this model. (I am with customer now), if there's any chance you can share it with me I'll be happy to send you back later any service or parts (or firmware) I have and you need, just let me know which one.

My mail is
rapidocument@gmail.com

Thanks in advance.

Jaime.

[ernesto]

Hello guys,

This machine won't feed from either cassette or bypass and if you manually open the bypass solenoid it feeds up to registration but reg. clutch won't activate, I already checked LVPS good and I am hesitating to change Main board or update the Firmware but, although I have the SST tool I didn't bring the FW for this model. (I am with customer now), if there's any chance you can share it with me I'll be happy to send you back later any service or parts (or firmware) I have and you need, just let me know which one.

My mail is
rapidocument@gmail.com

Thanks in advance.

Jaime.

Once it happened to me the pick up did not move nor cassette a4 neither bypass and the problem was the yellow little board in which is connected the solenoid, this yellow and little board was dead.

All the best

[rapidocument]

I'm ordering that one.