need help Canon CLC 3200

[ahmed96]

No I'm are not a tech

I got canon clc 3200 and I am in Birmingham?

[disam]

ok, you Need a c1, without this fiery does not work.

[teckat]

No I'm are not a tech

I got canon clc 3200 and I am in Birmingham?

Birmingham England

best bet is to call a CANON AUTHORIZED DEALERSHIP and have a Canon trained tech look over your print options

[ahmed96]

ok, you Need a c1, without this fiery does not work.

i got the C1 as in the picture 4 i have only got the ethernet port. what will i need it to get connect this.

IMG_0190.jpgIMG_0191.jpgIMG_0192.jpgIMG_0193.jpg

[disam]

you Need the I/F PCB, and nr 3 +4 without this you cannot connect the fiery.

FG6-9991-000

OPEN INTERFACE BOARD PCB ASS'Y

FH2-7042-000

CABLE, OPEN INTERFACE

FH9-0796-000

1

CABLE, CROSS

Bild 002.jpg

[teckat]

i got the C1 as in the picture 4 i have only got the ethernet port. what will i need it to get connect this.

IMG_0190.jpgIMG_0191.jpgIMG_0192.jpgIMG_0193.jpg

CALL FOR SERVICE/

see similar C1 install pdf
imagePass C1 v2--Install.pdf

Color Network Printer Unit-C1.pdf
because u need the I/F board , I/F Communications Cable, Crossover Cable ,etc.

C1 contents.jpg