how can customize the colors of canon c9070pro

[markndreu]

how can customize the colors of canon c9070pro

[teckat]

how can customize the colors of canon c9070pro

U have a Canon Controller connected ?????????


see attach

Before attempting any hardware replacement test using the following options:

1. From the printer Settings/Registration select Function Settings.




2. Select Printer.




3. Select Printer Settings.




4. Select Custom Settings.




5 . From Printer Settings select PCL.




6. Select CMS(Matching)/Gama.




7. From Printer Settings select either the Text Graphics or Image option.




8. Change settings by selecting Gama and test the print job again.

[markndreu]

Very Thanks Teckat I have the controller. Now photocopy is OK with plain paper. I have a problem when I print with heavy paper because transforms the colors of abstruse very
please help me

[markndreu]

hi everyone, I have a copy machine C9070 Pro, it works very good with plain paper but when i put heavy 1 heavy 2 heavy 3 ect, it transforms the color, it makes the paper darkness.

[teckat]

hi everyone, I have a copy machine C9070 Pro, it works very good with plain paper but when i put heavy 1 heavy 2 heavy 3 ect, it transforms the color, it makes the paper darkness.

+++++++++)

set up & use Heavy selection paper when u calibrate

[markndreu]

+++++++++)

set up & use Heavy selection paper when u calibrate

I have selected but is still the same think

[markndreu]

I have selected but is still the same think

how can i do the calibration about the heavy paper?

[zoraldinho]

Paper profiles! Read user manual.

[teckat]

how can i do the calibration about the heavy paper?

================================================== =======================================

also see attach pdf



For copy quality to stay consistent when running media heavier than 32lb paper (i.e. 60lb to 90lb) a proper auto gradation using the Heavy 1/2 mode must be performed.
The ideal weight to use for this adjustment should be a 60lb bright white sheet of heavy media.
Never use any type of glossy coated media to do any auto gradations. Media calibrations should also be done on the Colorpass or imagepass units.


Calibration Procedure


1. Clean/Adj optics. Clean/inspect optics and white plate/roller. Perform CCD Adj. Some older machines will be CCD Adj (without paper) and newer machines will be DF-WLVL 1-4 with good quality white paper.

2. Perform Full Auto Gradation. Now that the optics can properly read the data calibrate the copier. Perform this adjustment on the media being used to print onto. Bright white (98-100) 24lb-28lb is recommended for plain paper over using 20lb bond for more accurate color reproduction.
If the customer is using card-stocks perform adjustment on this as well. Generally 32lb-60lb cover is Heavy 1 and 61lb-80 cover is Heavy 2.


3. Calibrate the Fiery RIP. Enter calibration mode on copier through Printer, Settings, Functions, calibration, enter Fiery.1 for the password and press OK. If you do not have a densitometer choose the Standard Color Cal Measurement page method under set-up.
Use a clean Grey Scale positioned in the top center of the letter size portrait area of the platen glass. Press Calibrate and Yes to print the Measurement Page.
Place printed page over the Grey Scale and press Yes and then done to measure. After successful measurement press Yes to overwrite and to it affecting all users.


4. Print out a Test Page and Configuration Page. Under Printer, Print Pages, Test Page the Configuration. After verifying print quality place these with the COMPLETED Service Log attached to the machine.

5. Verify Customer Knowledge on Calibration Procedure. Ensure that the customer is aware of Steps 2 and 3 for increased quality/reliability and service time.

[markndreu]

20150404172757_00001.jpg20150404172852_00001.jpg this is the problem that i have with canon 9070pro, if someone knows how to solve it,
please give back an answer
plain paper heavy paper