Thanks: 
Likes: 
Dislikes: When setting the IP Address of the Canon Image Runner 4080, after power off/on it reverts back to a different unreachable address????
When setting the IP Address of the Canon Image Runner 4080, after power off/on it reverts back to a different unreachable address????
Is the DHCP setting on or off?
If I remember correctly, there is a battery on the controller that maintains IP settings.
Since this machine is sooooo old, I would think there's a good chance that's it.
i don't have access to Canon manuals any more (my company is no longer a dealer) so I can't provide you with more than that.
Please note that I'm drawing on some very old memories, and may be wrong, but this does seem to ring a bell.
“I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins
Are you working with a Fiery H1 controller? Are you setting the wrong one? Setting a Fiery controller is a number of steps through a menu system.
I have same problem in my DC-12 .
I changed Battery on motherboard of fiery and problem solved.
Ive had battery issues as well, but that in my case led to the ip adress being flushed to zeros, however that was sometime ago.
Reply With Quote
Bookmarks