Canon IRC2380

[jrgf67]

Greetings. I attached two double-sided printing a IRC2380 on one side nitida out correctly but the other side is almost faded. Has been changed drums, power supply, HVT and side door. Do you know that you can be ?. thanks

[ernesto]

It could be the transfer roller......

[zoraldinho]

Interesting....

Make a force stop and check print quality on drums and so on.Determine where the problem begins.

[copier tech]

Is this the first side or 2nd side that is faded, as if you have damp paper the first side will be poor, then the 2nd side good as the paper has dried out going through the fuser.

[jrgf67]

Greetings. Thank you all for answering.
First we have changed the whole door is where the Transferred roller.
Second problem is not fixed is intermittent so it is difficult to stop the machine also can not see the process in this machine.
Thirdly the paper is dry.

[copier tech]

I've seen the transfer belt cause faint prints

[zoraldinho]

I've seen the transfer belt cause faint prints

I also bet on ITB.

[ernesto]

Greetings. Thank you all for answering.
First we have changed the whole door is where the Transferred roller.
Second problem is not fixed is intermittent so it is difficult to stop the machine also can not see the process in this machine.
Thirdly the paper is dry.

HI,
Was the ITB UNIT the problem?

All the best

[jrgf67]

Greetings. I have asked the HVT ITB to try. As it informs you know something.thanks

[jrgf67]

Greetings. I've tried some changes in the machine but still the same. I changed the ITB, I changed the HVT ITB and I changed the DC controller. thanks