Ir3035 jamming in the fuser area.

[tibbs]

This machine jams just before the fuser and also in the fuser when making Ltr copies. The pick-up / separation rollers are new.
Can anyone help thanks much.

Regards.

[zoraldinho]

From senior tech i expect at least a jam code or some more info like printer counter or what you have done so far.

-check for sticking sensor flag foam
-old Fixing Film grease
-worn reg sensor flag
-new style Pressure Roller
-fixing sensor flag
-not have enough pressing between fixing rollers........

[Dutchman]

This machine jams just before the fuser and also in the fuser when making Ltr copies. The pick-up / separation rollers are new.
Can anyone help thanks much.

Regards.

Check the dail on the paper tray if that is set correctly with the paper used in that tray.

[tibbs]

Thanks much for the response, I have replaced all the pick-up rollers / separation rollers. The paper tray dials are correct. It jams at Ps 10 for letter and at Ps 14 for Lgl.

Thanks again.

[tibbs]

The jamming codes are as follows: code 108 for legal size says a delay jam.Sensor Ps14.
code 207 legal size stnry jam. Sensor Ps13.
code 201 letter size stnry jam sensor Ps10.

[copier tech]

Does it jam from both trays 1 & 2 & 3/4 if it has them? Also does it feed from the bypass tray?
If it jams from all ports you can rule out pick up delay issues