Thanks: 
Likes: 
Dislikes: HI
every body
I have mf9170c machine popping E000001 code can some one give me any detail on this code or let me know what causing it .is it fuser or power supply .
Thanks an advance
HI
every body
I have mf9170c machine popping E000001 code can some one give me any detail on this code or let me know what causing it .is it fuser or power supply .
Thanks an advance
Originally Posted by jake24482
Remove fix unit_check sleve conditions.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
It's overheating.Probably bad fixing sleeve unit.If you have sub code 0000 then main thermistor detect overheating.Sub code 0001 is the status where the detected temperature of the sub thermistor is overheating.Of course also can be DC.
Last edited by zoraldinho; 04-24-2015 at 07:13 PM.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
i did check the sleeve it is kind of bad from side .
is it same procedure to reset the code an ir series or some other way
Thanks
Posting Permissions
Reply With Quote
Bookmarks