Martin Yale 1217 Folder

[Scottb]

Has Martin Yale changed the feed roller design. I ordered a roller and what I got in isnt the same as what the folder has on it. I got a roller that has a allen set screw on the hub and what I got is a tension spring on the shaft that is screwed to the roller hub.


Thanks for the info in advance.

Scott

[Iowatech]

Martin Yale is not the manufacturer of the folders I work on, so what follows is probably useless nonsense.
Still, assuming that you are working on a model 1217A, I downloaded a parts list from here:
Downloads & Support
and found that the part number for the "feed wheel" (page 2, item 53) is W-A1217010. Is that the part number you used when ordering?
Sorry if that was a waste of time.