Tried HDD Uninstalled and also physical format then again logical format. Eventually I replaced HDD and Memory DIMMS. No difference.
Did DATA Clear as well..System error clear..
Re-flashed with R6 mass production - then GWH-R6 firmware in case this also touches anything else then freezing point and it did not work.
Windows PS driver also doesn't work.
Tried KM Driver 4.7.1 and Generic 4.4.5
So the only thing that works is PCL from windows
Tried printing PCL & PS fonts from machine user menu and that is fine.
There is offending command "image" with error "IOERROR"
C451 POSTSCRIPT ERROR.pdf
We are pulling the machine out tomorrow so I'm eager to see what happens in the workshop when I replace the MFPB as client wants it OUT
Bookmarks