Connecting a fiery to MPC4503?

[Hadster]

I have a customer who has fiery on his canon and would like to add my Ricoh MPc4503. I have not messed with fiery for a reason but he says if it will work he has the knowledge to set it all up and operate. My question is what info do you need from his fiery(model/type) and what do I need to hook it up to a non-fiery MPc4503. Thanks.... I think!

[KenB]

You’re not suggesting taking the Fiery off the Canon and putting it on the Ricoh, are you?

No can do. Period. (If that’s what you’re actually asking).

[slimslob]

EFI, Electronics for Imaging, fiery systems are designed for specific machines or groups of machines to optimize their capabilities. The MP CXX03s use a color controller E22C.

[peter42]

Fiery cant switched between Manufacturers.
Interface is different also for Minolta and Develop or IKON.
Even if the Basicmachine is the same.
Same Fuck for Developer/Toner etc.
No chance.
Tried it since 125i, the first Fiery with Canon.

[Phil B.]

I have a customer who has fiery on his canon and would like to add my Ricoh MPc4503. I have not messed with fiery for a reason but he says if it will work he has the knowledge to set it all up and operate. My question is what info do you need from his fiery(model/type) and what do I need to hook it up to a non-fiery MPc4503. Thanks.... I think!

they will have to buy a separate fiery for the 4503.
that's a lot of $$$ to throw on that machine .. MOST folks I have seen with fiery's have been oversold by a slick SALESGUY!