Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Senior Tech 100+ Posts jrf's Avatar
    Join Date
    Feb 2009
    Location
    Galway
    Posts
    142
    Rep Power
    32

    Job Centro is unable to connect to IC605 on KonicaMinolta C3070L

    Hi
    We have just set up a C3070L with an KM IC605
    Job Centro is not able to find any printer.
    We get an error 503 Service unavailable if we try and browse to it.
    Firmware is up to latest.

    Any ideas please

  2. #2
    Senior Tech 100+ Posts peter42's Avatar
    Join Date
    Jan 2012
    Location
    hda/dev/nul
    Posts
    110
    Rep Power
    26

    Re: Job Centro is unable to connect to IC605 on KonicaMinolta C3070L

    print Fiery configuration sheet
    find ip-adress of Fiery
    Set your laptop to same range of ip
    connect laptop to fiery with ethernetcable
    Log into webinterface of fiery
    Go to Setup
    Use Password Fiery.1
    Set Networksettings to actual configuration of existing network.
    Reboot Fiery and machine.

  3. #3
    Senior Tech 100+ Posts jrf's Avatar
    Join Date
    Feb 2009
    Location
    Galway
    Posts
    142
    Rep Power
    32

    Re: Job Centro is unable to connect to IC605 on KonicaMinolta C3070L

    Quote Originally Posted by peter42 View Post
    print Fiery configuration sheet
    find ip-adress of Fiery
    Set your laptop to same range of ip
    connect laptop to fiery with ethernetcable
    Log into webinterface of fiery
    Go to Setup
    Use Password Fiery.1
    Set Networksettings to actual configuration of existing network.
    Reboot Fiery and machine.
    Thanks for reply, however the IC605 is not a fiery, it is a KM controller.
    but I got it sorted , browse to ip and add :30083 to end of ip address.
    There is also a little configuring to be done under network settings.

  4. #4
    Junior Member
    Join Date
    Jan 2022
    Location
    Lagos
    Posts
    1
    Rep Power
    0

    Re: Job Centro is unable to connect to IC605 on KonicaMinolta C3070L

    Quote Originally Posted by jrf View Post
    Thanks for reply, however the IC605 is not a fiery, it is a KM controller.
    but I got it sorted , browse to ip and add :30083 to end of ip address.
    There is also a little configuring to be done under network settings.
    Hello, Please what are the "little configuring that needs to be done.
    Thanks

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here