Thanks:
0
Likes:
0
Dislikes:
0
-
Riso RP3700 and SC7900
Hey all,
I have an RP3700 linked to an SC7900 and I would like to run it via appletalk to a macintosh running Leopard. I know the drivers call for os 8.6 but I also know that it is possible to run it through leopard. Does anyone have any suggestions on how we could get this set up via Appletalk?
Thanks in advance
Anthony
-
Junior Member
- Rep Power
- 0
Re: Riso RP3700 and SC7900
Just use CUPS!
- Open browser > goto http://localhost:631
- Administration > Add printer
- Choose > windows sspools
- fill in the IP address of the RIP in the following format: socket://ipaddress
- provide ppd driver file
- you will get an error after setting up, about conflicting settings, enable the multifeed(?), just enable multifeed tray (select 'installed' in drop down menu) and the error is gone.
- Now you can use the printer from any system dialog.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks