Riso RP3700 and SC7900

[antoneue]

Hey all,

I have an RP3700 linked to an SC7900 and I would like to run it via appletalk to a macintosh running Leopard. I know the drivers call for os 8.6 but I also know that it is possible to run it through leopard. Does anyone have any suggestions on how we could get this set up via Appletalk?

Thanks in advance
Anthony

[then]

Just use CUPS!

• Open browser > goto http://localhost:631
• Administration > Add printer
• Choose > windows sspools
• fill in the IP address of the RIP in the following format: socket://ipaddress
• provide ppd driver file

• you will get an error after setting up, about conflicting settings, enable the multifeed(?), just enable multifeed tray (select 'installed' in drop down menu) and the error is gone.
• Now you can use the printer from any system dialog.