Tech forums for copier repair  

Go Back   Copytechnet.com > Technical Forums > Connectivity

Connectivity All things network and software related

Scan to File Copystar 3035

Connectivity

Reply

 

LinkBack Thread Tools Display Modes
Old 04-21-2009   #1 (permalink)
Junior Member
 
Join Date: Apr 2009

United States us nevada
Location: las vegas, nv
Posts: 2
Rep Power: 0elsteef is on a distinguished road
Scan to File Copystar 3035

I have a customer that has asked me to setup scanning on their CS3035.

The machine has the printer and scanner buttons to the left of the display. Does this mean the print/scan option is installed?
If so, how do I go about configuring scan to file?

I am not new to connectivity, but I am not familiar with the Copystar scan configuration.

Your help is very much appreciated,
Steve
elsteef is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
Old 04-21-2009   #2 (permalink)
Service Manager
50+ Posts
 
Raymondd's Avatar
 
Join Date: Jan 2008

United States us louisiana
Location: Louisiana
Posts: 87
Rep Power: 4Raymondd is building a good name for himself
The print/scan system are options. The buttons on the control panel are standard...
Raymondd is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 04-21-2009   #3 (permalink)
Technician
 
Join Date: Feb 2009

United States us texas
Location: Marble Falls, Tx
Posts: 15
Rep Power: 2scanman is on a distinguished road
On the right side at the rear, if you have 2 network RJ45s then the print scan is installed,
scanman is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 04-27-2009   #4 (permalink)
Junior Member
 
Join Date: Apr 2009

United States us nevada
Location: las vegas, nv
Posts: 2
Rep Power: 0elsteef is on a distinguished road
Next steps....

This machine does have 2 network ports.

What sort of scanning does this machine support? Email? SMB?

Does it require any software to enable scanning?

How do I get in to the settings to allow scanning configuration?

Thanks again
elsteef is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 04-27-2009   #5 (permalink)
Technician
 
Join Date: Feb 2009

United States us texas
Location: Marble Falls, Tx
Posts: 15
Rep Power: 2scanman is on a distinguished road
It will scan to network, scan to e-mail or you can use a twain driver and scan to an application. For scan to network you need a utility called (scanner file utility) and to set it up there is a utility called (address editor). You can download the address editor at Kyocera.com or copystar.com, I am not sure you can still download the scanner file utility. Check to see if there is a disk with the copier that may have these on them. You can also do set up thru a web browser. Let me know if you need the file utility and I can e-mail it to you.
scanman is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 04-27-2009   #6 (permalink)
Technician
 
Join Date: Feb 2009

United States us texas
Location: Marble Falls, Tx
Posts: 15
Rep Power: 2scanman is on a distinguished road
Also, to get into the scanner defaults at the copier itself, there is a black button to the right of the display that says defaults/counter. Press that button then touch scanner defaults, you must have a network connection to the scanner card or it won't let you in to the default settings. It will ask for a pin (6482) then you can get into the defaults for the scan system.
scanman is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 06-29-2009   #7 (permalink)
Junior Member
 
Join Date: Jun 2009

United States us california
Posts: 1
Rep Power: 0geekor is on a distinguished road
sorry to piggyback on this thread, but I was looking for some information and happened to stumble on it.

Basically our main Multifunction went down, and with 1 1/2 months left on the lease, it is a waste of putting money back into it. We have a working CS3035 as a backup copier, but really could use the scanner function as well. Unfortunately, it does NOT have the network already attached and scanning is disabled. Is there a place to buy the Network interface card and get the scanning installed? If anyone can help, please send me a PM, thanks!
geekor is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

Tags
3035, copystar, cs 3035, file, scan, scan to file

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Google

All times are GMT +1. The time now is 10:24 PM.


Your Link Here
Toner Chip Resetter
Your Link Here

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.0
Ad Management plugin by RedTyger