Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Technician
    Join Date
    Feb 2009
    Location
    Midwest
    Posts
    41
    Post Thanks / Like
    Rep Power
    11

    Canon IR C3200 with C-1 wont print multiple copies

    Hi,
    Got c-1 with windows XP with the canon driver from their site PCL 5.5 ver. 85.5 I think its like the 3 or 4 one down from the top on their imagepass page.
    Cannot print more than 1 copy of something when you select "number of copies" in the printer dialog box.
    Only one sheet or 1 set comes out no matter what you put in no of copies box.
    Thanks in advance
    Billy


  2. #2
    Senior Tech 100+ Posts Captain Scott's Avatar
    Join Date
    Dec 2008
    Location
    Cape Town
    Posts
    108
    Post Thanks / Like
    Rep Power
    12

    Paper type mismatch?

    Are any of the trays named eg letterhead, thick if so there could be a paper type mismatch causing it just to print one page. Try adjusting driver to match paper type on macine or change tray back to plain paper and test.


  3. #3
    Technician
    Join Date
    Feb 2009
    Location
    Midwest
    Posts
    41
    Post Thanks / Like
    Rep Power
    11

    c-1 wont print multiple

    I don't think it was set to other than plain paper I
    will check i just got word this AM that the Driver may be too current for the version software on the C-1 and were going to try an "earlier driver" see if that works I will post result

    Billy


  4. #4
    Junior Member
    Join Date
    Mar 2010
    Posts
    2
    Post Thanks / Like
    Rep Power
    0
    Billy,

    Did you happen to resolve this issue? We are having the same problem with the same printer.

    Thanks,

    Keith


  5. #5
    East Coast Imaging 2,500+ Posts


    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,400
    Post Thanks / Like
    Rep Power
    50
    You should try the C1 post script driver.

    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  6. #6
    Geek Extraordinaire 1,000+ Posts KenB's Avatar
    Join Date
    Dec 2007
    Location
    Cleveland, Ohio
    Posts
    2,110
    Post Thanks / Like
    Rep Power
    43
    I have a similar issue with an iRC5185 and an ImagePASS-H1.

    Everything is latest and greatest on both.

    The customer tries to print a 2 page duplex document from a Mac with OS 10.5.sumthin' from InDesign CS4. One page prints just fine, then it just stops printing.

    We re-imaged the RIP, reseated the memory, etc, etc.., and nothing changed.

    Fortunately, CWS is running on the same Mac, and we can change the number and print as many as we see fit.

    Unfortunately, I don't have another account with a similar enough setup to test.

    Weird...

    I used to be hooked on the Hokey Pokey, but I turned myself around.

  7. #7
    East Coast Imaging 2,500+ Posts


    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,400
    Post Thanks / Like
    Rep Power
    50
    Did you try to print as a image.

    Attached Images Attached Images
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  8. #8
    Geek Extraordinaire 1,000+ Posts KenB's Avatar
    Join Date
    Dec 2007
    Location
    Cleveland, Ohio
    Posts
    2,110
    Post Thanks / Like
    Rep Power
    43
    Quote Originally Posted by SCREWTAPE View Post
    Did you try to print as a image.
    Thanks, Screwtape,

    Was that screenshot from InDesign? I don't remember seeing it.

    Ken

    I used to be hooked on the Hokey Pokey, but I turned myself around.

  9. #9
    East Coast Imaging 2,500+ Posts


    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,400
    Post Thanks / Like
    Rep Power
    50
    No! Its from adobe reader. Not to sure if you would have the option. Here's another screen shot where you have to go.

    Attached Images Attached Images
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  10. #10
    Geek Extraordinaire 1,000+ Posts KenB's Avatar
    Join Date
    Dec 2007
    Location
    Cleveland, Ohio
    Posts
    2,110
    Post Thanks / Like
    Rep Power
    43
    Quote Originally Posted by SCREWTAPE View Post
    No! Its from adobe reader. Not to sure if you would have the option. Here's another screen shot where you have to go.
    Thanks, that's what I thought.

    If the operator distills the file to a PDF, it prints just fine.

    I tried every setting there was in InDesign, but no "Print as Image" option.

    Actually, I kinda like the workaround, print one and use CWS for the rest. It's only a 10 foot walk to the machine. , but it's bugging me as to why this is happening.

    I searched the Adobe knowledgebase; tons of issues, but not this one, and yes, it happens with multiple files, Unfortunately, only one Mac on site that has InDesign.

    I used to be hooked on the Hokey Pokey, but I turned myself around.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here