Ricoh MP4500 config question

[CSI]

Hi, I have MPC2500 which created access control range 1 to 5 by previose owner. How im going to delete it from MFP? now i cannot access the ip adress from computer too.

Urgently need help

Thanks

Try with a laptop and configure it on the same IP range. Access the Web Image Monitor and loging with "supervisor" (no password) to change the password "admin" (no password)
Desactivate all identification restriction


Then try the procedure described by Telnet Choro1dal

[kkwong0209]

access control range 1: 172.024.008.005 - 172.024.008.005
access control range 2: 172.024.010.059 - 172.024.010.059
access control range 3: 172.024.009.041 - 172.024.009.041
access control range 4: 172.024.010.145 - 172.024.010.145
access control range 1: 134.200.096.008 - 134.200.096.008

Above are access range from my MPC2500.

So my machine ip address i set as 172.024.008.005 and my laptop set as 172.024.008.006.
From machine ping to laptop no problem but cant ping from laptop to machine. What is a problem.
I also able to set a scanner folder by SMB.

From cmd or telnet, i still cannot access to my machine. I did follow step by step from your advice.
Is there is any mistake from me??
What should i do (base on info i provide above)?

[rthonpm]

access control range 1: 172.024.008.005 - 172.024.008.005
access control range 2: 172.024.010.059 - 172.024.010.059
access control range 3: 172.024.009.041 - 172.024.009.041
access control range 4: 172.024.010.145 - 172.024.010.145
access control range 1: 134.200.096.008 - 134.200.096.008

Above are access range from my MPC2500.

So my machine ip address i set as 172.024.008.005 and my laptop set as 172.024.008.006.
From machine ping to laptop no problem but cant ping from laptop to machine. What is a problem.
I also able to set a scanner folder by SMB.

From cmd or telnet, i still cannot access to my machine. I did follow step by step from your advice.
Is there is any mistake from me??
What should i do (base on info i provide above)?

Set your laptop's IP as 172.24.8.5 and change the copier's to 172.24.8.6 and you will be able to access the machine. Just set all of the IP addresses to 0.0.0.0.