Hi all,
I just buy Konica 7020 with IP 421 second hand with no installation CD, is there step by step guide on how to configure this printer in my network?
Thank you.
Hi all,
I just buy Konica 7020 with IP 421 second hand with no installation CD, is there step by step guide on how to configure this printer in my network?
Thank you.
Thank you for your prompt answer, but i need to install that printer with network card, with IP adress
read the book
If your printer spits out a config sheet with an ip address on it set up a PC on your network with a compatible address and brows to the NIC with the web utility, change the addressing to one that conforms to your network and save the password is sysadm. If no address is set then see this:
DescriptionKN303, can the network address information be input from the operation panel?SolutionThe KN303 network address information cannot be input from the operation panel. Setting up the network address information is similar to the procedure for
a KN301. Entering the network address must be performed remotely with the ARP (Address Resolution Protocol) command, BOOTPL32 or using the latest
MAP utility.10Copyright 2006, Konica Minolta Business Solutions U.S.A., Inc. October 2006
Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
Now into Ip TV KODI Boxes
Thank you for your prompt answer, konica 7020 is in my network!
I use Map utility to change the IP of the controller, and install driver.
Thank you!
Bookmarks