Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Field Supervisor 1,000+ Posts
    Scanning to Email with Exchange

    TheOwl's Avatar
    Join Date
    Nov 2008
    Posts
    1,734
    Rep Power
    62

    Scanning to Email with Exchange

    We have all at some stage had problems with machines scanning to email or sending notifications when Exchange is involved. More than a question post, this more of a how to post.

    Most SMTP problems could be gotten around by using a whitelist in Exchange 2003, but not 2007 and 2010 are slightly different. The attached document describes how to add a Receive Connector in Exchange which allows for un-authenticated SMTP Relaying. The good thing about this though is that the SMTP Relay Connector is locked down to just certain IP addresses which would be your devices and not the PC's which helps IT people say yes.

    Anyway, hope this helps.

    Email with Exchange 2010.pdf
    Please don't ask me for firmware or service manuals as refusal often offends.

  2. #2
    Gimp 500+ Posts JSC's Avatar
    Join Date
    Dec 2006
    Location
    Devon
    Posts
    618
    Rep Power
    46

    Re: Scanning to Email with Exchange

    Nice one!! thanks.
    The gene pool could use a little chlorine.

  3. #3
    Man About Town 250+ Posts CanonSco's Avatar
    Join Date
    Jul 2010
    Posts
    368
    Rep Power
    31

    Thumbs up Re: Scanning to Email with Exchange

    Thanks.
    Yes, I am a nerd.
    Gaming PC - check. Raspberry Pi - Check. Custom ROM on phone - check. Thick glasses - check.

  4. #4
    Field Supervisor 1,000+ Posts
    Scanning to Email with Exchange

    TheOwl's Avatar
    Join Date
    Nov 2008
    Posts
    1,734
    Rep Power
    62

    Re: Scanning to Email with Exchange

    If anyone is getting errors with Exchange 2007 SP3 when trying to add the connector, please check out this Microsoft KB aticle:

    You cannot create a receive connector after you install Exchange Server 2007 SP3
    Read through the article which tells you how to get around the issue.
    Please don't ask me for firmware or service manuals as refusal often offends.

  5. #5
    Master Of The Obvious 10,000+ Posts
    Scanning to Email with Exchange

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: Scanning to Email with Exchange

    Kudos to Owl. He's pulled me out of several of these situations. Many thanks! =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here