Fiery password

[blamkey]

Whoops I guess I needed to post once in order to access the file. Thanks so much it helped out alot!!!

[buster68]

how view password on konica c350 or where put this file passwd.ps to view password.

Thanks

it only works on older Fierys (linux based). In webtools, hit downloader and drop it into the direct cue. It will print out the password. Or you could just do a factory default and reconfigure the whole thing.

[dtxerox1212]

Fiery Password Retrieval Tool

[lex0429]

Thanks!

[RRodgers]

Remane .txt to .ps

Thanks bud.

[terramobil]

You can download password.ps using command work station

Or use DOS LPR command:
copy password.ps to C:\
open the command tool: start/run/ type "cmd" and press "Enter" button
Type "LPR -S IP-Address of device -P print c:\password.ps" and press "Enter"
If the password is shown as a md5 hash, use a tool to decrypt it. For example: MD5 Decrypter.co.uk, Over 13 Billion Decrypted Hashes, Free MD5 Decryptor, MD5 Cracker, MD5 Security Hacking

[captain1976]

Hello, I am having the same issue with a fiery I just put on a 3105 color machine. I'm stumped since its asking for a password. I got the controller from a wholesaler and they don't have a clue what it it.
Thanks,

Mike

[terramobil]

Hi Mike,
I can't find a Ricoh 3105. What is the design name (Venus, Athena Apollon etc.)? Is it a fiery or GW Controller? If you have a GW Controller, the standard username is: admin with no password (blank) from GW 2005 onwards. GW 2004 Controllers and earlyer have a blank username an as password: password. If you have a fiery controller, the file passoprd.ps schould help you.

regards

terramobil