Hi Neil this is Mike from Barbados. I have the following problem with my konica 7075's, you helped me some time ago. Konica 7075 printers with IP601 print controllers. I seem to be having a problem with 2 of them. On one of them when I send a paper to print to it it starts to print but it sends out 2 pages one which is totally blank and the other with a syntax error message on it and it stops printing after that, what is causing this and how do I fix this problem? The other one is a different problem, I send a paper there and if it is a reasonably large paper it will send out a page with an I.O error message on it and the it will start over and print to that same point and send out the same message and over again until you cancel it. But if you send a small paper there it will print the entire paper with no errors. How do I fix this problem aswell any ideas and help with these 2 issues will be great. thanks Mike
It's on the way, look for a YouSendit link in your mail.
Hi again its Mike from Barbados, sometime ago we chatted and you sent me the firmware for the IP601 print server for my Konica 7075. I seem to have lost the disk and file since then and I have to reload one of my IP boxes, would it be possible for you to resend me that firmware? my email address is miker@caribsurf.com Thanks hope to hear from you soon. Mike
