Hi, i am a fairly new copier tech. I have been working on a Toshiba e-studio 2050c for about a week now. I have been going through it very thoroughly trying to make it as close to perfect as i can get it.One problem i ran in to that i cannot seem to figure out is a void on the black developer roller,which is causing a white line when i try to print in black and white. The density of the black copy is very light. I have replaced the developer material, and replaced the roller a few different times with extra rollers i had. When i take the developer unit out i can visibly see a void where the material is not covering. Any advice i can get on the topic will be greatly appreciated. Thank you
Bookmarks