Thanks: 0
Likes: 0
Dislikes: 0
Hello,
IM working on a Toshiba e-studio 5540c and this machine seems to be very temperamental.One of the problems i have encountered with it has been a line or mixed colors across the center of the page after it starts up. The line only lasts about 4 copies then goes away. I have registered and calibrated the machine changed the transfer belt cleaning blade. the problem still persists. I have not found anything in the manual about this problem. Thank you.
Do you have any samples for me to look at? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
i have the same problem. any solutions?Originally Posted by NextGenCody
Same question. Where's the sample? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
it sounds like remains of the auto calibration pattern after start up in your book you will find the 08 code to shut off auto calibration try that and see if it goes away
... or you could figure out why the primary transfer belt is not cleaning off the color registration patches properly. Shutting off auto calibration won't solve a belt cleaning issue. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
shutting off auto cal was not meant to be a fix but to troubleshoot the problem by process of elimination after the problem is solved auto cal should be turned back on
Posting Permissions
Reply With Quote
Bookmarks