Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
  1. #11
    Technician
    Join Date
    Jan 2017
    Location
    Midlothian
    Posts
    19
    Post Thanks / Like
    Rep Power
    0

    Re: Need advice with what copier brand I should purchase.

    You could try image@wase, they have a configurator to help you find out what copiers fit your needs for good prices !


  2. #12
    Field Supervisor 500+ Posts
    Join Date
    Mar 2013
    Location
    Meridian, MS
    Posts
    586
    Post Thanks / Like
    Rep Power
    17

    Re: Need advice with what copier brand I should purchase.

    As a technician, I personally prefer the Kyocera's any day over the Ricoh/Savin machines!...Why?....fuser codes from thermistors on the Kyocera are pretty much non-existent!...with the Ricoh/Savins, you'll be going for fuser codes from dirty thermistors!....just sayin'!.....plus, on the Kyoceras, you don't have to rebuild the fuser (room for human error!)--just install a new one and reset PM count! Ricoh/Savin, you'll have to rebuild the fuser, so that's downtime AND room for human error in the rebuild process!....also, cleaning charge rollers on the Kyoceras is a breeze!....don't even have to remove the PCU's!...just unclip, slide out and clean with a damp paper towel!



    Kyo = Cut, Cera = Ceramic
    Kyocera = Ceramic Knife
    Ricoh = Lemon
    CUT THE LEMON WITH A KNIFE!!!

  3. #13
    Technician
    Join Date
    Jan 2017
    Location
    palm bay florida
    Posts
    13
    Post Thanks / Like
    Rep Power
    1

    Re: Need advice with what copier brand I should purchase.

    we all have our opinions but if you look at the number of post by manufacturer on this site that might tell you something Toshiba has 4 to 5 thousand threads while the other big companies have 11 to 15 thousand threads just saying I think the more threads the more issues a brand has


    ps try to find a guy like me who sells lease returned copiers with a warranty I would sell you 5 machines for around 10 grand instaed of a 5 year lease where you will be spending about 80 grand a guy like me can sell you toner and parts for a lot less than 70 grand over 5 years


  4. #14
    Field Supervisor 500+ Posts
    Join Date
    Mar 2013
    Location
    Meridian, MS
    Posts
    586
    Post Thanks / Like
    Rep Power
    17

    Re: Need advice with what copier brand I should purchase.

    Quote Originally Posted by bruce 49dcs View Post
    we all have our opinions but if you look at the number of post by manufacturer on this site that might tell you something Toshiba has 4 to 5 thousand threads while the other big companies have 11 to 15 thousand threads just saying I think the more threads the more issues a brand has


    ps try to find a guy like me who sells lease returned copiers with a warranty I would sell you 5 machines for around 10 grand instaed of a 5 year lease where you will be spending about 80 grand a guy like me can sell you toner and parts for a lot less than 70 grand over 5 years
    You are CORRECT!

    Also, trying to find an "off lease" used Ricoh is alot easier to do than trying to find an "off lease" used Kyocera/Mita/Copystar!....reason?!...people tend to keep the Kyocera/Mita/Copystar machines longer with fewer issues than the Ricoh brands! The Kyo machines last well and are quite easy to maintain (cleaner too!)

    Ricoh is a "same shit, different day/model" brand.

    Kyocera listens and improves.

    I am just saying as a technician from observation and experience!



    Kyo = Cut, Cera = Ceramic
    Kyocera = Ceramic Knife
    Ricoh = Lemon
    CUT THE LEMON WITH A KNIFE!!!

  5. #15
    Technician mthomasebs's Avatar
    Join Date
    May 2017
    Location
    Norwich
    Posts
    48
    Post Thanks / Like
    Rep Power
    1

    Re: Need advice with what copier brand I should purchase.

    Quote Originally Posted by bruce 49dcs View Post
    we all have our opinions but if you look at the number of post by manufacturer on this site that might tell you something Toshiba has 4 to 5 thousand threads while the other big companies have 11 to 15 thousand threads just saying I think the more threads the more issues a brand has


    ps try to find a guy like me who sells lease returned copiers with a warranty I would sell you 5 machines for around 10 grand instaed of a 5 year lease where you will be spending about 80 grand a guy like me can sell you toner and parts for a lot less than 70 grand over 5 years
    More threads doesn't necessarily mean more issues. It could easily be that there are more units out in the field for that certain manufacturer.


  6. #16
    Junior Member
    Join Date
    Jun 2017
    Location
    London
    Posts
    1
    Post Thanks / Like
    Rep Power
    0

    Re: Need advice with what copier brand I should purchase.

    Quote Originally Posted by Upinflamezzz View Post
    This is my first post and I apologize if I'm post in the wrong forum. I'm currently in the middle of receiving proposals to replace 5 copiers. Ricoh 907EX, Ricoh 8001, Ricoh 6001, Ricoh 2851 and a Ricoh 4310n. I've met with 3 companies and the incumbent Ricoh and am looking for Maybe Am
    reliability of the copier especially in a warehouse environment. My choices are between Ricoh - Savin - Kyocera and Xerox. All of the proposals have been about the same price so I'm really focused on the reliability and durability of the machines. Any advice from any tech would be greatly appreciated and thank you in advance.
    Maybe Market Inspector can help you out if you are still looking for copiers. There you can compare different brands and hopefully, it'll help you with the choice.
    Compare Price and Quality From Different Suppliers | Market-Inspector


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here