Thanks:
0
Dislikes:
0
-
how to fix service call - SC545
Hi Team,
I would like you to help me fix this error (service call - SC 545) on RICO SP C242SF Printer
-
Re: how to fix service call - SC545
I just looked that up and that machine appears to be a MFD, so you might want to post your question here:
http://www.copytechnet.com/forums/ri...tetner-lanier/
The majority of Ricoh techs can be found there, and unlike me most of them work on the newer machines.
Good luck!
-
Re: how to fix service call - SC545
SC545: Heating Lamp Full-Power Error
The fusing lamp is fully-powered for a certain time while the fusing unit stays in the stand-by mode and is not rotating.
Posible cause:
- Deformed thermistor
- Thermistor not in the correct position
- Defective fusing lamp
Replace:
1. Replace the fusing unit.
2. Replace the fusing lamp.
Note:
Execute "Engine Maintenance Menu" to recover the machine after completing the recovery procedure. Otherwise, the machine continues to issue this SC code and cannot be operated.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks