Thanks:
0
Likes:
0
Dislikes:
0
-
Sharp MX-M565N E6-11 Code.
I am getting an E6-11 Code on this machine. I have replaced DSPF control board with new board from Sharp. I have cleaned the DSPF CCD and have executed shading adjustment with no errors. The DSPF scanner illuminates when testing but E6-11 continues to display after reboot. Single sided copying and scanning is still functional but no 2 sided is available. I have the 0300 firmware installed. Any help would be appreciated.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks