Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Junior Member
    Join Date
    Dec 2017
    Location
    Hanoi
    Posts
    1
    Rep Power
    0

    What Screwdriver Are You Using?

    Just for discussions sake, what is everybody's go to screwdriver? I carried the long bladed Snap-On ratcheting for years, but I've recently swapped to Wiha and I'm VERY happy with those. Just needs knurling on the blade like Vessel does....

    So what are you guys carrying?

  2. #2
    Service Manager 2,500+ Posts
    What Screwdriver Are You Using?


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    3,860
    Rep Power
    133

    Re: What Screwdriver Are You Using?

    See pic. Panasonic EY7410 3.6-Volt Lithium-Ion. Light balanced. Battery lasts weeks! Adjustable torque. Put a dewalt magnetic bit holder on it and #2 phillip bit. To many screws on these digital machines to be turning screws by hand!
    Attached Images Attached Images
    Last edited by copyman; 12-28-2017 at 04:33 AM.

  3. #3
    Service Manager 1,000+ Posts
    What Screwdriver Are You Using?


    Join Date
    Feb 2010
    Posts
    1,988
    Rep Power
    75

    Re: What Screwdriver Are You Using?

    Nothing special here. just hate rubber grips because they snag in back pocket.

  4. #4
    Field Supervisor 500+ Posts
    What Screwdriver Are You Using?

    Blizzoo's Avatar
    Join Date
    Aug 2013
    Location
    east europe
    Posts
    581
    Rep Power
    30

    Re: What Screwdriver Are You Using?

    I'm using a Snap-On ratcheting for more than a year and I'm happy with it, I have lost it and recovered it shortly a few times, felt like loosing your wallet
    Defects are simple, our mind is complicated

  5. #5
    Senior Tech 100+ Posts
    What Screwdriver Are You Using?

    Ratchet2501's Avatar
    Join Date
    Mar 2017
    Location
    Vernal, Utah
    Posts
    206
    Rep Power
    17

    Re: What Screwdriver Are You Using?

    Quote Originally Posted by copyman View Post
    See pic. Panasonic EY7410 3.6-Volt Lithium-Ion. Light balanced. Battery lasts weeks! Adjustable torque. Put a dewalt magnetic bit holder on it and #2 phillip bit. To many screws on these digital machines to be turning screws by hand!
    That, Knipex pliers and Klein screwdrivers. I'm luckier than most though on selection, we recently got a wholesale supplier out here. Even though my boss doesn't like my "bringing tools to work" but. . . . have to have good tools.

  6. #6
    Master Of The Obvious 10,000+ Posts
    What Screwdriver Are You Using?

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,469
    Rep Power
    463

    Re: What Screwdriver Are You Using?

    Schroder 47473 re-badged as Craftsman. It's weighted heavier than most, so you get a lot of rotational momentum when spinning out screws. I'll probably jinx myself for saying it, but I've been using this same screwdriver for 15+ years:

    Craftsman Grip-Driver 47473.jpgSchroder 47473 Mag Tip.jpg

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  7. #7
    Gavin_Parkes
    Guest

    Re: What Screwdriver Are You Using?

    Long shaft Snap-on since 1986, 31 years and still going albeit a little shinier than it was!!

  8. #8
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,397
    Rep Power
    152

    Re: What Screwdriver Are You Using?

    wh03739.jpg
    Wiha Ph2 * 300.
    Cant work with anything else.
    Whatever

  9. #9
    Service Manager 1,000+ Posts
    Join Date
    Apr 2009
    Location
    LaPorte Indiana
    Posts
    1,054
    Rep Power
    43

    Re: What Screwdriver Are You Using?

    Grey Goose and Minutemaid!! Helps to take the edge off!!!

  10. #10
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,397
    Rep Power
    152

    Re: What Screwdriver Are You Using?

    No!
    Beer is better!
    Whatever

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here