BizHub C6500/6501 - Need This Plate

[CPM Mike]

I bought a used BizHub C6500 and was about to attached a OT-502 kit to it when I discovered that the previous owner had removed the plate from the paper exit area needed to attach the OT-502 mechanism to.

If anyone has an old machine they're parting out and could sell me this plate, I would be truly grateful.

I've attached a pdf with the drawing showing the plate exactly.

[Phil B.]

I bought a used BizHub C6500 and was about to attached a OT-502 kit to it when I discovered that the previous owner had removed the plate from the paper exit area needed to attach the OT-502 mechanism to.
If anyone has an old machine they're parting out and could sell me this plate, I would be truly grateful.
I've attached a pdf with the drawing showing the plate exactly.

I think you should post that request in this forum: http://www.copytechnet.com/forums/the-parts-room/

[methogod]

try ordering using the C6501 or the c7000 part number. also try some of the online parts sites - i know for sure you wont find any stock of the C6500 numbers.