Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Aug 2016
    Location
    portharcourt, Rivers
    Posts
    2
    Rep Power
    0

    Ricoh mp 2000 print out black horizontal lines stain

    My mp 2000 started making black horizontal lines stain each time print out or make a photocopy.
    I brought out the OPC drum unit, clean the opc drum, charger roller, and the cleaning blade and then reinstalled all components.
    However I got sc302 error after powering The machine and I've to repeat the cleaning process all over, before error code left the screen yet the line stains are still coming out.
    I did a replacement of the OPC drum and cleaning blade and yet the black lines kept being printed out.
    I've to put off the machine for about 3 hours and upon reprinting there wasn't any stain instead there is a blank lines at an interval equivalent to the circumference of the OPC drum.
    Please help me out on what to do

  2. #2
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    9,499
    Rep Power
    206

    Re: Ricoh mp 2000 print out black horizontal lines stain

    The terms horizontal and vertical are meaningless when talking about copies and print outs. Now can you clarify whether the stains are parallel to the direction on paper travel or not.

    The diameter of the hot roller is very close to hat of the drum.

  3. #3
    Service Manager 2,500+ Posts
    Ricoh mp 2000 print out black horizontal lines stain

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    4,761
    Rep Power
    77

    Re: Ricoh mp 2000 print out black horizontal lines stain

    Quote Originally Posted by slimslob View Post
    The terms horizontal and vertical are meaningless when talking about copies and print outs. Now can you clarify whether the stains are parallel to the direction on paper travel or not.

    The diameter of the hot roller is very close to that of the drum.
    1) print outs of the issue WITH paper feed direction noted would be GREAT to have
    2) after replacing parts did you run any calibrations on the machine (init drum?)
    3) life used on ALL consumables and service parts
    4) TOTAL page counts
    5) what does the fuser assmy look like?
    6) since on both prints and copy .. rule out optics
    7) genuine OEM parts/Supplies or 3rd party/compatibles?
    8) I take it you are an End User.Owner?

    PhilB. "The Dentist"

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here