+ Reply to Thread
Results 1 to 3 of 3

Thread: HP Laserjet 2605dn color misalignment

  1. #1
    Junior Member SOCPWB is on a distinguished road
    Join Date
    Aug 2009
    Posts
    9
    Rep Power
    0

    Exclamation HP Laserjet 2605dn color misalignment

    I am trying to fix a HP CLJ2605 that is printing all 3 colors about 2 or 3 mm below where they are supposed to be. I have swapped the cartridges, used the Clean ETB function under Service menu, re-caliberated it several times, and updated the firmware, none of which seemed to make any improvement. Does anyone have any suggestion on what else I could try? Thanks in advance.

  2. #2
    Trusted Tech 50+ Posts Gleq is on a distinguished road
    Join Date
    Feb 2007
    Location
    Accra
    Posts
    56
    Rep Power
    7
    Hi
    Check the gears if all is right
    change the ETB
    good luck

  3. #3
    Technician bernyb is building a good name for himself
    Join Date
    Feb 2008
    Location
    Chico, CA
    Posts
    13
    Rep Power
    5
    For the answer to this problem go to fixyourownprinter.com You need to do a reset of the nvram but I forgot how to do it off hand.

+ Reply to Thread

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts